Home | Register | Contact | Verify Email | FAQ |
Blogs | Photo Gallery | Press Release | Results | HoseheadsClassifieds.com


Welcome Guest. Already registered? Please Login

 

Forum: SCRAFAN.COM Forum (go)
Moderators: ljennings


Records per page
 
Topic: 2015 USAC SPRINT CAR RULES UPDATES Email this topic to a friend | Subscribe to this TopicReport this Topic to Moderator
Page 1 of 1   of  0 replies
ljennings
MyWebsite MyResults MyPressRelease
February 02, 2015 at 05:32:53 PM
Joined: 11/22/2004
Posts: 27816
Reply

Below are changes and additions to the 2015 USAC Sprint Car rules. Red text indicates this has been removed, Black text indicates this has been added.

302-E.
No tolerance allowed on engine and driveline offset, must be on chassis centerline engine must be mounted straight up in vertical position (no tilt left or right)

303-J.
Right side cockpit panels must have a minimum opening of one hundred (100) Square inches. Panels that restrict driver's vision at the discretion of USAC officials will not be permitted.
Right side cockpit panels may be a maximum of forty (40) inches high at the rear and a maximum of thirty-eight (38) inches high at the front as measured from the bottom of main frame tube at the engine plate and projected rearward twenty-one (21) inches with a minimum six (6) inches vertical opening from the afore mentioned point forward, including side visor.

303-Q.
Side visors on roll cage will be limited to eight (8) inches tall. Visors that restrict driver's vision at the discretion of USAC officials will not be permitted.


308-H.
Electronically controlled tire pressure bleeders will be allowed. Electronic bleeders may not be capable of being controlled or adjusted remotely.






Post Reply
You must be logged in to Post a Message.
Not a member register Here.
Already registered? Please Login





If you have a website and would like to set up a forum here at HoseHeadForums.com
please contact us by using the contact link at the top of the page.

© 2024 HoseHeadForums.com Privacy Policy