This message was edited on
June 30, 2010 at
04:07:42 PM by KZ Communications
Mark Burch Motorsports – Consistency is Key
NEWTON (June 29, 2010) – Last weekend was a good weekend for the Mark Burch Motorsports crew. They made it a two day weekend keeping things consistent as always. "It is very gratifying to know that we are constantly improving while at the same time remaining consistent." Owner Mark Burch had to say.
Friday night the #1M set out to lap the World Outlaw Series at Junction Motor Speedway in McCool Junction, Nebraska but as the saying goes, they truly are the "greatest show on dirt". Overall, the Mark Burch Motorsports Chad Humston Racing team got to experiment a little before heading back to Knoxville Raceway. "I want to send out a really big thank you to Brian Brown for loaning us a flat Vortex top wing. It was fun to be able to try out an 'open' right rear tire and compare some things with the different wing." Chad said of the Friday night experiments.
Saturday took the team back to Knoxville Raceway, in Knoxville, Iowa. Chad Humston took the Engler Machine and Tool #1M out for the fifth quickest qualifying session, starting off the night right. The heat race proved to be a little bit of a challenge however. The start was awful for the inside row in which Chad was placed. Everyone got bottled up and unfortunately someone smashed the #1M's rear bumper. Although it was a rough start for Chad, he pulled through nicely running down a few cars and finishing in fourth place, with second and third in his sites.
Chad started second row outside in the 360 A-Main and after the fourth restart they finally got to do some racing. Chad led a few laps but could tell that they were off a little on the set up for the race. Meanwhile, Dustin Selvage was close by, on rail around the bottom of the track. Humston made some ground weaving his way through traffic, but Dustin was too strong for the #1M. Chad ended the night with a well deserved second place for the team. "Congratulations to the #7 of Dustin Selvage. That was a job well done!" Chad had to say of the main.
You can check out Chad three nights in a row this weekend! The Mark Burch Motorsports Chad Humston Racing team will start their holiday weekend off on Thursday at Junction Motor Speedway in McCool Junction, Nebraska and then make their way to I-80 Speedway, Nebraska Raceway Park in Greenwood, Nebraska. They will finish the weekend back at Knoxville Raceway in Knoxville, Iowa on Saturday. "We are really looking forward to three nights of racing in a row to hone our skills against the best in the Midwest." Chad had to say of the upcoming weekend. "We just have to continue putting together a good package so that Chad can do his job night in and night out." Owner Mark Burch had to say looking forward to the rest of the season.
Online
To keep up with Mark Burch Motorsports, check them out online at http://www.markburchmotorsports.com/!
You can also follow Chad, of Chad Humston Racing, by checking him out online at http://www.chadhumston.com/!
For weekly updates on Mark Burch Motorsports, join our mailing list by emailing "MB Motorsports" to [email protected].
Partner of the Week: S&S Welding, Inc
Since 1980, S & S Welding, Inc. had been an industry leader in manufacturing the finest custom built motorcoaches and trailers. Our distinct and innovative designs provide image and impact for all of our customers. From our basic tag trailers to out most elaborate motorcoach and trailer combinations, our quality continues to prove our dedication to each customer. (http://www.ssweldinginc.com/)
Mark Burch Motorsports
The mission of Mark Burch Motorsports is to be an innovator in the unrefined business of Sprint Car racing on dirt, while representing our sponsors and manufacturers in a professional and positive manner both on and off the track. It is our goal to develop and improve our winning spirit and carry on our winning tradition by utilizing the growth of close personal relationships throughout our organization. This pursuit of excellence is the fuel that feeds the fire of our souls.
Engler Machine and Tool, Inc.
Engler Machine was started in 1980 by Tim Engler. His main line of business at that time was plastic injection molds. Over the years he has diversified very widely leaning more towards "high performance products". He now builds fuel injection systems, custom made pulling chassis, gears, shafts, specialty CNC products, racing engines and some custom machining.
Tim has been involved in tractor pulling and holds 13 national titles in that sport, he no longer pulls himself but, has been influential to the success of many other pullers through his advice and building capabilities. He races winged sprint cars when time allows this is something he truly likes and wishes he had more time to do.
Currently, Tim and his staff have been developing a new mini-sprint fuel injection system. There are a handful of these units currently being dyno and track tested with great results. Look for full production of these units this summer. Please call 812-386-6254 for more information. (www.englermachine.com)
Aaron Elliott - Arrow Truck Sales – Kansas City, MO.
Arrow Truck Sales, Inc. began operations in 1950 from a small used truck lot in downtown Kansas City, Missouri. From the initial start-up, the company has followed the principle of providing high-quality, pre-owned vehicles to customers who want to maximize the value of money. Arrow has always followed a policy of honesty and full disclosure. We place high value on the reputation we've built throughout the North American trucking industry. Our pledge: We are not going to jeopardize our reputation for the sake of avoiding a little work or for a short-term profit based on misleading practices. Unlike some of our competitors, we carry a wide selection of all makes and models. With over 2,000 trucks in inventory, we can find the right truck to fit your needs. And since our inventory changes daily, we are always looking to buy quality, pre-owned units as well. So when you have a single unit or a fleet to dispose of, call us. With branches located throughout the United States and Canada, we are always close by. Quality, value and selection - Arrow Truck Sales, Inc. is your best source of pre-owned medium and heavy duty trucks in North America. The Volvo Group is one of the world's leading manufacturers of trucks, buses and construction equipment, drive systems for marine and industrial applications, aerospace components and services, and is one of the world's leading producers of heavy-diesel engines (9-16 liter). The Group also provides complete solutions for financing and service. The Volvo Group, which employs about 96,000 people, has production facilities in 19 countries and sells their products in more than 180 markets. Volvo Group sales for 2009 amounted to approx. 29 BUSD. The Volvo Group is a publicly-held company headquartered in Gothenburg, Sweden. Volvo Shares are listed on Nasdaq OMX Nordic Exchange and are traded OTC in the US. Call 800-311-7144 for more information about Arrow Truck Sales, or download the brochure. (http://www.arrowtruck.com/docs/locations.details.aspx?branch=KC [email protected])
WolfWeld Chassis
WolfWeld racing chassis and custom welding, located in Tea, South Dakota. Contact Doug Wolfgang at 605-368-9955 for more information.
Whitetail Paradise Outfitters
Whitetail Paradise Outfitters offers a one of kind hunting experience. They are nestled along the scenic Pine Creek, near Long Pine, Nebraska. Whitetail Paradise Outfitters is an all inclusive outfitter offering rifle, archery and black powered hunting. They specialize in Turkey hunts, Whitetail or Mule deer hunts, Goose hunts, predator hunts and also offer seasonal trout fishing and seasonal Wing hunts as well. Your hunt pricing includes lodging, food, RV hookups, a scent free gear storage unit and trout fishing! For more information please contact Bruce Rossman at 402-340-6255 or visit the website at http://whitetailparadisellc.com/
Triple R Tire
For all of your Farm, Truck and Automotive tire needs contact: Bruce Rossman at 402-925-5633. Triple R Tire, 47641 US Highway 20, Atkinson, NE 68713.
Vortex Racing Products
VortexRacing Productsis the industry leader in Sprint Car Wing design. From humble beginnings in 1995 where we began producing wings for our own use we quickly became engaged in producing wings for other race teams. Inspired by a life-long background in racecar design and manufacturing from our Dad, we (Paul and Lynton) continued to evolve into a company known for producing a product a little different from the rest. This ability to manufacture a Wing that is unique in design is what has been our success. With the use of our own race teams in Australia and America, we continually push the boundaries of design with an extensive testing program of our products each and every year. It is with our understanding of chassis design and manufacturing that we are able to communicate with our clients and tailor a wing package that best suits their driver, team and make of chassis. We call this," The Vortex Advantage". (http://www.vortexracingproducts.com.au/)
Mark Burch Motorsports would like to thank the following product sponsors; Schoenfeld Headers (http://www.schoenfeldheaders.com/); Total Seal Piston Rings (http://www.totalseal.com/); Manton Push Rods (http://www.mantonpushrods.com/); Ultra Lite Brake Components (http://www.reddevilbrakes.com/page/page/890208.htm); Pro Shocks (http://www.proshocks.com/); Dyers Top Rods (http://www.dyersrods.com/); King Racing Products (http://www.kingracingproducts.com/King_Racing_Web_Site/Index.html); Speedway Motors (http://www.speedwaymotors.com/); Weld Racing (http://www.weldracing.com/); Hoosier Tire (http://www.hoosiertire.com/); Harris Decals (http://www.harrisdecals.com/); Eckley Racing Engines (http://www.eckleyracingengines.com/); Rage Fuel Systems (http://www.ragefuelsystems.com/); Electromotive Engine Controls (http://www.electromotive-inc.com/); Huggins Cams (); Wireless Amber Alerts (https://www.wirelessamberalerts.org/index.jsp); National Rod Ends; Wulff Pumps (http://www.wulffpumps.com/); Shaver Wesmar Gear Drives (http://www.wesmarracing.com/components_sw.htm); CV Products (http://www.cvproducts.com/Default.aspx); and Saldana Racing Products(http://www.saldanaracingproducts.com/)
Chad Humston at Knoxville Raceway (Kendall Higday Photo)
KayLea Zumbach
KZ Communications
Newton, IA USA
[email protected]
|
